- Home
- Catalogs
- Wiregrass Student Handbook and Catalog 2024-2025
- Programs
- Electrical Maintenance Technician, TCC
Electrical Maintenance Technician, TCC (EM81) Technical Certificate of Credit
The Electrical Maintenance Technician Technical Certificate of Credit provides instruction in industrial systems electrical inspection, maintenance, service, and repair. Topics include DC and AC fundamentals, motor controls, magnetic starters and braking systems, PLCs, and industrial wiring procedures.
This program qualifies for the HOPE Career Grant.
Program Outcomes: This program prepares graduates for careers in industrial electrical maintenance, equipping them with essential skills and knowledge. Students will master blueprint reading and interpretation, and gain a deep understanding of DC and AC motors and motor controls. They'll also become proficient in inspecting, maintaining, and repairing magnetic starters, braking components, and systems. The curriculum includes maintenance of industrial PLCs and training in DC and AC circuit analyses. Furthermore, graduates will learn industrial wiring procedures, ensuring they're prepared for real-world challenges in the field.
Careers: Electrical and Electronics Repairers, Commercial and Industrial Equipment; Industrial Electrical Maintenance Technician
Length of Program: 2 Terms
Admission Requirements:
| Occupational Courses | 18 |
|---|---|
| IDSY 1110Industrial Motor Controls I
Weekly Contact Hours: Lecture - 2 Lab 2 - 2 Lab 3 - 3 Pre-requisite(s): None Co-requisite(s): None This course introduces the fundamental concepts, principles, and devices involved in industrial motor controls,theories and applications of single and three-phase motors, wiring motor control circuits, and magnetic starters and braking. Topics include, but are not limited to, motor theory and operating principles, control devices, symbols and schematic diagrams, NEMA standards, Article 430 NEC and preventative maintenance and troubleshooting. |
4 |
| IDSY 1120Basic Industrial PLC's
Weekly Contact Hours: Lecture - 1 Lab 2 - 4 Lab 3 - 3 Pre-requisite(s): None Co-requisite(s): None This course introduces the operational theory, systems terminology, PLC installation, and programming procedures for Programmable Logic Controllers. Emphasis is placed on PLC programming, connections, installation, and start-up procedures. Other topics include timers and counters, relay logic instructions, and hardware and software applications. |
4 |
| IDSY 1130Industrial Wiring
Weekly Contact Hours: Lecture - 2 Lab 2 - 2 Lab 3 - 3 Pre-requisite(s): None Co-requisite(s): None Teaches the fundamental concepts of industrial wiring with an emphasis on installation procedures. Topics include: grounding, raceways, three-phase systems, transformers (three-phase and single-phase), wire sizing, overcurrent protection, NEC requirements, industrial lighting systems, and switches, receptacles, and cord connectors. |
4 |
| Choose One of the Following (3 Hours) | 3 |
| IDFC 1011Direct Current I
Weekly Contact Hours: Lecture - 2 Lab 2 - 2 Lab 3 - 0 Pre-requisite(s): None Co-requisite(s): MATH 1012 or MATH 1013 Introduces direct current (DC) concepts and applications. Topics include: electrical principles and laws; batteries; DC test equipment; series, parallel, and simple combination circuits; and laboratory procedures and safety practices. |
3 |
| IDSY 1101DC Circuit Analysis
Weekly Contact Hours: Lecture - 2 Lab 2 - 2 Lab 3 - 0 Pre-requisite(s): None Co-requisite(s): None This course introduces direct current (DC) concepts and applications. Topics include: electrical principles and laws; batteries; DC test equipment; Series, parallel, and simple combination circuits; and laboratory procedures and safety practices. |
3 |
| ELTR 1010Direct Current Fundamentals
Weekly Contact Hours: Lecture - 2 Lab 2 - 2 Lab 3 - 0 Pre-requisite(s): None Co-requisite(s): None Introduces direct current (DC) concepts and applications. Topics include: electrical principles and laws; batteries; DC test equipment; series, parallel, and simple combination circuits; and laboratory procedures and safety practices. |
3 |
| Choose One of the Following (3 Hours) | 3 |
| ELTR 1020Alternating Current Fundamentals
Weekly Contact Hours: Lecture - 2 Lab 2 - 2 Lab 3 - 0 Pre-requisite(s): None Co-requisite(s): None Introduces the theory and application of varying sine wave voltages and current. Topics include: magnetism, AC wave generation, AC test equipment, inductance, capacitance, and basic transformers. |
3 |
| IDFC 1012Alternating Current I
Weekly Contact Hours: Lecture - 2 Lab 2 - 2 Lab 3 - 0 Pre-requisite(s): None Co-requisite(s): IDFC 1011 Introduces the theory and application of varying sine wave voltages and current. Topics include: magnetism, AC wave generation, AC test equipment, inductance, capacitance, and basic transformers. |
3 |
| IDSY 1105AC Circuit Analysis
Weekly Contact Hours: Lecture - 2 Lab 2 - 2 Lab 3 - 0 Pre-requisite(s): IDSY 1101 Co-requisite(s): None This course introduces alternating current concepts, theory, and application of varying sine wave voltages and current, and the physical characteristics and applications of solid state devices. Topics include, but are not limited to, electrical laws and principles, magnetism, inductance and capacitance. |
3 |
Faculty
Industrial Systems Technology Instructor
Coffee Campus
Electrical/Industrial Systems Technology Program Coordinator
Valdosta Campus
Industrial Systems Technology Instructor
Ben Hill-Irwin & Coffee Campuses
-
Technical & Industrial
-
Industrial/Electrical Systems
- Basic Mechatronics Technician, TCC
- Electrical Maintenance Technician, TCC
- Industrial Systems Technology, Diploma
- Mechatronics Technology, Degree
- Basic Electricity Technician, TCC
- Industrial Electrician, TCC
- Industrial Electrical Assistant, TCC
- Programmable Control Technician, TCC
- Industrial Fluid Power Technician, TCC
- Industrial Systems Fundamentals, TCC
- Industry 4.0 Technology, Degree
-
Industrial/Electrical Systems
Up one level
Programs of Study
Notice and Responsibilities Regarding this Catalog
The information in this College Catalog and Student Handbook accurately reflects current policies and procedures at the time of publication. Students are admitted to the College under and are subject to the provisions of the WGTC Catalog and Student Handbooks for the term they initially enroll. Students in all programs are admitted under and are subject to the provisions of the College Catalog and Student Handbook and applicable addendums for the term they are admitted to the program at Wiregrass Georgia Technical College. If for any reason a break in enrollment occurs, students must reapply and satisfy the College Catalog and Student Handbook requirements for the term of their re-entry to any program. The provisions of this catalog are not to be regarded as an irrevocable contract between Wiregrass Georgia Technical College and the student. The College reserves the right to change any provision or requirement at any time.
- Table of Contents
- President's Message
- General Information
- Statement of Equal Opportunity
- Accreditation Statement
- Access to Student Records (FERPA)
- Enrollment Information
- International Student Admissions Requirements
- Programs for High School Students
- Change of Programs and Dual Majors
- Assessment
- Tuition and Fees
- Financial Assistance Information
- Foundation
- Student Registration and Academic Information
- Academic Procedures and Advisement
- Prior Learning Credits
- Attendance Policy
- Adding and Withdrawing from Courses
- Grade Reporting and Grading System
- One-Stop Enrollment and Success Center
- Support Services
- Student Organizations and Activities
- General Policies and Procedures
- Dress Code
- Student Grievances General Policy
- Unlawful Harassment and Discrimination of Student Policy
- Emergency Procedures
- Community Resources
- Adult Education and GED
- Technical Standards for Health Sciences
- Faculty
- Programs of Study
- Programs of Study
- Divisions
- Courses
Alumni, former students, or current students requiring an archived catalog prior to the ones listed above can email the Office of the Registrar at registrar@wiregrass.edu or call (229) 259-5536.
