Course Catalog

Electrical Maintenance Technician - EM81 Technical Certificate of Credit

Campus Locations: Valdosta, Coffee

The Electrical Maintenance Technician Technical Certificate of Credit provides instruction in industrial systems electrical inspection, maintenance, service, and repair. Topics include DC and AC fundamentals, motor controls, magnetic starters and braking systems, PLCs, and industrial wiring procedures.

Requirements:

Submit a completed application and application fee
Be at least 16 years of age
Submit official high school transcript or High School Equivalency transcript or college transcripts showing successful completion of 60+ semester credits or 72+ quarter credits
Submit official college transcripts, if applicable
Present acceptable ACCUPLACER, ACT, ASSET, COMPASS, PSAT, or SAT scores, Georgia Milestones Literature/Composition or Georgia Milestones American Literature/Composition (for meeting English requirement only) or GED score of 145 or higher, or have one of the following: an associate degree or higher or have a High School overall GPA of 2.0, a HOPE Scholarship GPA of 2.6 or higher after the completion of 10^th grade, or have 2 years documented work experience in the subject area. Documentation on a college transcript of successful completion of appropriate courses from a regionally accredited college or university may be accepted in lieu of test scores.

Experienced Worker Certification Form

This program is a HOPE Career Grant eligible program for students who are HOPE Grant eligible. The Career Grant award is a fixed amount per semester based on the number of credit hours taken. Maximum award per term is $500.

Gainful Employment Information

Curriculum Outline (18 hours)

Occupational Courses	18
IDSY 1110Industrial Motor Controls I Weekly Contact Hours: Lecture - 2 Lab 2 - 2 Lab 3 - 3 Pre-requisite(s): None Co-requisite(s): None This course introduces the fundamental concepts, principles, and devices involved in industrial motor controls,theories and applications of single and three-phase motors, wiring motor control circuits, and magnetic starters and braking. Topics include, but are not limited to, motor theory and operating principles, control devices, symbols and schematic diagrams, NEMA standards, Article 430 NEC and preventative maintenance and troubleshooting.	4
IDSY 1120Basic Industrial PLC's Weekly Contact Hours: Lecture - 1 Lab 2 - 4 Lab 3 - 3 Pre-requisite(s): None Co-requisite(s): None This course introduces the operational theory, systems terminology, PLC installation, and programming procedures for Programmable Logic Controllers. Emphasis is placed on PLC programming, connections, installation, and start-up procedures. Other topics include timers and counters, relay logic instructions, and hardware and software applications.	4
IDSY 1130Industrial Wiring Weekly Contact Hours: Lecture - 2 Lab 2 - 2 Lab 3 - 3 Pre-requisite(s): None Co-requisite(s): None Teaches the fundamental concepts of industrial wiring with an emphasis on installation procedures. Topics include: grounding, raceways, three-phase systems, transformers (three-phase and single-phase), wire sizing, overcurrent protection, NEC requirements, industrial lighting systems, and switches, receptacles, and cord connectors.	4
Choose One of the Following (3 Hours)	3
IDFC 1011Direct Current I Weekly Contact Hours: Lecture - 2 Lab 2 - 2 Lab 3 - 0 Pre-requisite(s): None Co-requisite(s): MATH 1012 or MATH 1013 Introduces direct current (DC) concepts and applications. Topics include: electrical principles and laws; batteries; DC test equipment; series, parallel, and simple combination circuits; and laboratory procedures and safety practices.	3
IDSY 1101DC Circuit Analysis Weekly Contact Hours: Lecture - 2 Lab 2 - 2 Lab 3 - 0 Pre-requisite(s): None Co-requisite(s): None This course introduces direct current (DC) concepts and applications. Topics include: electrical principles and laws; batteries; DC test equipment; Series, parallel, and simple combination circuits; and laboratory procedures and safety practices.	3
ELTR 1010Direct Current Fundamentals Weekly Contact Hours: Lecture - 2 Lab 2 - 2 Lab 3 - 0 Pre-requisite(s): None Co-requisite(s): None Introduces direct current (DC) concepts and applications. Topics include: electrical principles and laws; batteries; DC test equipment; series, parallel, and simple combination circuits; and laboratory procedures and safety practices.	3
Choose One of the Following (3 Hours)	3
ELTR 1020Alternating Current Fundamentals Weekly Contact Hours: Lecture - 2 Lab 2 - 2 Lab 3 - 0 Pre-requisite(s): None Co-requisite(s): None Introduces the theory and application of varying sine wave voltages and current. Topics include: magnetism, AC wave generation, AC test equipment, inductance, capacitance, and basic transformers.	3
IDFC 1012Alternating Current I Weekly Contact Hours: Lecture - 2 Lab 2 - 2 Lab 3 - 0 Pre-requisite(s): None Co-requisite(s): IDFC 1011 Introduces the theory and application of varying sine wave voltages and current. Topics include: magnetism, AC wave generation, AC test equipment, inductance, capacitance, and basic transformers.	3
IDSY 1105AC Circuit Analysis Weekly Contact Hours: Lecture - 2 Lab 2 - 2 Lab 3 - 0 Pre-requisite(s): None Co-requisite(s): None This course introduces alternating current concepts, theory, and application of varying sine wave voltages and current, and the physical characteristics and applications of solid state devices. Topics include, but are not limited to, electrical laws and principles, magnetism, inductance and capacitance.	3